GDS28
Free Standing Direct Vent or B-Vent Gas Stove
|
PDF
Manual
|
Features
- Heater and wall furnace rated
- 30,000 BTU's in natural gas or propane and 86% steady
state maximum efficiency
- No electricity is required to light or operate - ensures
reliable use even during power failures
- "Yellow Dancing FlameŽ" burner system
- Heat and flame adjustable
- Compact, easily accessible and user-friendly controls
- Equipped with 100% safety shut off feature for your peace
of mind
- Clear, 230 sq. inches of viewing area - 21" x 12 3/8"
- Black trivet
- Heat radiating, high temperature ceramic bay glass door
available in 24 Karat gold plated or metallic black painted (ordered
separately)
- Ease of operation is added with an optional, convenient
wall thermostat or an on/off auto temperature remote control
- Built-in blower extracts maximum heat from the extra
large heat exchanger.
President's Limited Lifetime Warranty
Accessories
- Hand held remote controls
- Millivolt wall thermostat
- Gold plated trivet
- Chrome plated trivet & accent bar
- 24 Karat gold plated door
- Black painted door
- B-vent adaptable
- Heat circulating blower
- Through the wall or roof venting kits (direct vent
only)
- Decorative andirons
- Euro kit full length side panels in black, brushed
stainless steel and gloss enamel, red, green, almond and black
|
Optional
full length decorative
enamel side panels
|
|
|
Specifications
|
GDS28
|
Fuel
|
Natural
Gas
Propane
|
BTU Input
Natural Gas
Propane
|
30,000
26,000 |
BTU Output
Natural Gas
Propane
|
25,500
22,400 |
Maximum Heating Efficiency
(Steady State) Natural
Gas
Propane |
85%
86%
|
Maximum Heating Efficiency
(AFUE) Natural
Gas
Propane |
76%
77% |
P4 Rating
(Canada Only)
Natural
Gas
Propane |
58%
58%
|
|
Additional Information
- Direct vent
model requires no chimney, it vents conveniently through
a wall or roof and uses outside combustion air
- Wall furnace
rated
- Approved
for bathroom (direct vent only) bedroom, bed-sitting room
and basement installations
- Suitable
for mobile home installation
- Patented
B-vent adapter kit conveniently modifies the direct vent
stove into a conventional B-vent unit
- The GDS28
is also approved with Simpson Dura-Vent, as well as Wolf
Steel Venting Components
- Installs
safely on any floor, even carpet and vents up to 20 ft.
horizontally and up to 40 ft. vertically
|
|
Tested to ANSI Z21.86, Z21.88
CSA 2.32 and CSA 2.33 |
Line dimensions are to
be used as a guide only. Please consult your installation
manual
for updated and precise measurements before proceeding to install
or frame your Napoleon Fireplaces.
Return
To The Gas Fireplaces
|
