GVFS Fireplace
PDF Manual

Features
  • Up to a maximum of 30,000 BTU's with 99.9% steady state high efficiency
  • Turns on/off at the flick of a switch
  • Equipped with 100% safety shut off feature, secondary safety system incorporates ODS (Oxygen Depletion Sensor) for peace of mind
  • No electricity required - ensures reliable operation even during power failures
  • President's Limited Lifetime Warranty
Accessories
  • Decorative brick panels, metal brick panels and MIRRO-FLAME porcelain reflective panels
  • Polished brass and brushed stainless steel trim
  • Polished brass and brushed stainless steel 3D trim
  • Polished brass brushed stainless steel and black louvres
  • Solid painted black panel inset
  • Cast iron surrounds in painted black, porcelain enamel black or porcelain enamel majolica brown blue and green
  • Ornamental insets in painted black, brushed stainless steel and 24 karat gold plated
  • Andirons in painted black or 24 karat gold plated
  • Optional wall mounted thermostatic control
  • Optional heat-activated blower system, including variable speed control improves heat air distribution
  • Hand-held modulating thermostatic remote (controls flame and blower)
  • Millivolt wall thermostat
  • Heat circulating blower



Shown with black louvres and
porcelain refelctive panels








Vent free appliances are not approved for sale in Canada and some US states



Specifications

 GVF42
Fuel Natural Gas
Propane
BTU Input
Natural Gas
Propane
40,000
36,000
BTU Output
Natural Gas
Propane

30,000

28,500
Maximum Heating Efficiency
(Steady State)

Natural Gas

Propane

 

99.9%

99.9%

  Additional Information
  • This is an unvented gas-fired heater that uses air from the room in which it is installed
  • Provisions for adequate combustion and ventilation air must be provided.
  • Can be installed on an exterior or interior wall
  • Zero clearance to combustibles
  • No need for costly foundation or brickwork
  • Ground level and above
  • Vent free available in United States only


Dimensions



Tested as a heater to the unvented
heating standard ANSI Z21.11.2

(Approved for use in selected US States only)


Line dimensions are to be used as a guide only. Please consult your installation manual
for updated and precise measurements before proceeding to install or frame your Napoleon Fireplaces.

Back to Gas Products