NZ25
Wood Burning Zero Clearance and Masonry Fireplace |
PDF
Manual |
Features
- Air wash insulated with ceramic fiber and protected with
stainless steel cover plate eliminates deterioration and assures
complete combustion, maintaining an extremely clean viewing glass.
- Stainless steel log retainer and primary "bottom air feed"
assists in cold start up and to "recharge" a small, dying fire.
- Uses outside or inside combustion air.
- Full brick patterned refractory liner retains heat and
supports overnight burns.
- Two stainless steel secondary air tubes generate a fascinating
display of "YELLOW DANCING FLAMESŪ".
- An "afterburner" just above the baffle using primary air
promotes secondary combustion and clean burn.
- Large "king size" functional ash pan with folding lid and
dual carrying handles.
- Cast iron grate with self closing ash dump.
- Single lever combustion control with optional motorized
thermostat allows for automatic regulation of burn rate
- President's Limited Lifetime Warranty
Accessories
- Blower kit - one or two
blowers may be installed
- Electric wall thermostat
to control burn rate
- Hot air gravity vent system
- Central heating blower
- Outside combustion air
kit
- Hot air vent louvre - in
polished brass or black
- Attractive polished brass,
black or 24 Karat gold plated louvers available.
- Arched door in 24 Karat
gold plated or traditional painted black
- Webbed arched door in traditional
painted black
|
Shown with webbed
arched 24 karat
gold plated door and louvres

Shown with webbed arched black
door and black louvres
|
|
|
Specifications
|
NZ25
|
| Outside
dimensions |
383/4W
x 401/2H x 251/2D (includes standoffs) |
| Firebox
chamber |
22W
x 15H x 13D |
Weight
|
326
LB |
| Firebox
capacity |
2.38
cu. ft. |
| Approx.
area Heated* |
2000
sq. ft. |
Heat
Output BTU/h
(high burn)** |
60,000 |
| Burn
Time (low fire)* |
8
hours |
| Outside
combustion air |
yes
|
| R-2000
approved (Canada) |
yes |
| Max.
log size |
18" |
| Flue
size-prefabricated |
7" |
| Flue
size-masonry |
8",
8" sq., 8 x 12 flue tile |
| Catalytic
combustor |
no |
- *Figures
may vary with individual conditions
- **Wolf Steel Ltd own test showing
realistic BTU using hardwood logs with regular refueling.
Heat output will differ depending on chimney draft as
well as type, moisture content and size of wood
- Install as a zero clearance fireplace
with factory-built chimney or as a masonry fireplace using
an existing or new masonry chimney.
|
|
 |
| Line dimensions are to
be used as a guide only. Please consult your installation
manual
for updated and precise measurements before proceeding to install
or frame your Napoleon Fireplaces. |
Back to Wood Burning Products |