NZ26 EPA Listed Non Cataliytic Wood Burning Fireplace

Features
    • High efficiency and low emissions are achieved through a NON-CATALYTIC HIGH TECH design - You never have to replace a catalytic combustor to achieve a clean burn
    • Uses outside or inside air combustion.
    • Full refractory brick liner
    • Four stainless steel secondary air tubes
    • Firebox aerodynamics allow you to open the door without drawing smoke into the room.
    • Heat radiating high temperature ceramic glass.
    • Pre-installed, automatic, variable speed blower switch
    • Heavy duty mig welded construction
    • Safety tested and listed to Standards in Canada and the United States: ULC S610, ULC S627, UL 127 for zero clearance fireplaces and to S639 for solid fuel burning masonry fireplaces
    • Cast iron grate with self-closing ash dump
    • Large capacity ash pan with lid and dual carrying handles
    • Easy, single lever combustion control
    • President's Limited Lifetime Warranty
Accessories
    • Variable speed control
    • Blower kit
    • Wall thermostat
    • Motorized thermostat for automatic regulation of burn rate
    • Black, 24 Karat gold plated, or polished brass louvres
    • 24karat gold plated door
    • Central heating system
    • Outside combustion air kit
    • Arched door and webbed arched door in 24 Karat gold plated or traditional painted black
NZ26
Shown with webbed arched 24 karat
gold plated door and louvres


Classic arched 24 karat gold plated
door and louvres


Specifications NZ26
Emissions (grams per hour) 5.4
Size 42 1/4W x 44 1/2H x 25 1/2D
Firebox chamber 22W x 10H x 13D
Door size 19 1/2W x 27 7/8H 
Weight without bricks 326 LBS
Appox. area heated*

1,000-2,000
Heat Output BTU/hr

11,500 - 27,400**
Heat output BTU/hr (high burn) 70,000**
Burn time (low fire) 9 hours
Catalytic combustor no
Mobile home approved yes
R2000 approved yes
Max log size 18"
Outside combustion air yes
Flue diameter 6"
Flue size-prefabricated 6"
  • *Figures may vary with individual conditions
  • **Wolf Steel Ltd own test showing realistic BTU using hardwood logs with regular refueling. Heat output will differ depending on chimney draft as well as type, moisture content and size of wood.
  • Install as a zero clearance fireplace with factory-built chimney or as a masonry fireplace using an existing or new masonry chimney.

CERTIFIED FOR EMISSIONS TO EPA PHASE 2 1990 AND DEQ 1988 STANDARDS

Line dimensions are to be used as a guide only. Please consult your installation manual
for updated and precise measurements before proceeding to install or frame your Napoleon Fireplaces.

Back to Wood Burning Products